Reach In Chambers

Reach-in Temperature Humidity Controlled Stability Chambers are constructed entirely from Stainless Steel, inside and out. The Temperature Humidity models are fully ICH compatible and have a range of 2°C to 70°C + 2°C uniformity throughout the chamber and 20% to 96% RH + 5%.

View F-Gas Range for this product.

Click the image to zoom in

  • Chamber

    Chamber

Get More Information
  • 2" thick glass fiber insulation

  • Painted Stainless Steel exterior

  • Stainless Steel interior with 4 shelves

  • Antimicrobial coatings available

  • Choice of door positioning and opening

  • Wide range of accessories available

  • StabilityPLUS™ Airflow

Specifications by Model:



33 cu ft Models:


 


Temperature Controlled Stability Chambers (33R)

 

Chamber Volume33 cu ft 
934 Liters
Chamber Dimensions33”w x 27”d x 60”h 
84cm x 69cm x 152cm
External Dimensions41”w x 35”d x 90”h 
104cm x 89cm x 229cm
Temperature range2°C to 70°C
Control Resolution0.1°C
Uniformity at 37°C+ 2°C
Heat-up time: Amb - 37°C7 minutes
Heat-up time: 10°C - 50°C22 minutes
Recovery time at 37°C**1.25 minutes
No. of shelves supplied4
Max no. of shelves19
Shelf area (each)6 sq ft (0.5 sq M)
Electrical Services115V, 1Ph, 50/60Hz 
2.0kW, 16A
Shipping Weight1,200 lbs; 545 Kg

 

ICH Stability Chambers - Temperature and Humidity Controlled (33HR,33HA)


 33HR33HA
Chamber Volume33 cu ft 
934 Liters
33 cu ft 
934 Liters
Chamber Dimensions33”w x 27”d x 60”h 
84cm x 69cm x 152cm
33”w x 27”d x 60”h 
84cm x 69cm x 152cm
External Dimensions41”w x 35”d x 90”h 
104cm x 89cm x 229cm
41”w x 35”d x 90”h 
104cm x 89cm x 229cm
Temperature range2°C to 70°C35°C to 70°C
Control Resolution0.1°C0.1°C
Humidity range20% - 96% RH20% - 96% RH
Control Resolution0.1°C0.1°C
Uniformity at 37°C+ 1°C+ 1°C
Heat-up time: Amb - 37°C7 minutes7 minutes
Heat-up time: 10°C - 50°C22 minutes-
Recovery time at 37°C**1.25 minutes1.25 minutes
No. of shelves supplied44
Max no. of shelves1919
Shelf area (each)6 sq ft (0.5 sq M)6 sq ft (0.5 sq M)
Electrical Services220V, 1Ph, 50/60Hz 
2.0kW, 16A
220V, 1Ph, 50/60Hz 
2.0kW, 16A
Shipping Weight1,600 lbs; 727 Kg1,200 lbs; 545 Kg

 

 

Stability Chambers - Fingerprint Development (33FC)



Chamber Volume33 cu ft 
934 Liters
Chamber Dimensions33”w x 27”d x 60”h 
84cm x 69cm x 152cm
External Dimensions41”w x 35”d x 90”h 
104cm x 89cm x 229cm
Temperature range35°C to 100°C
Control Resolution0.1°C
Humidity range20% - 96% RH
Control Resolution0.1°C
Uniformity at 37°C+ 2°C
Heat-up time: Amb - 37°C7 minutes
Heat-up time: 10°C - 50°C22 minutes
Recovery time at 37°C**1.25 minutes
No. of shelves supplied4
Max no. of shelves19
Shelf area (each)6 sq ft (0.5 sq M)
Electrical Services220V, 1Ph, 50/60Hz 
2.0kW, 16A
Shipping Weight1,000 lbs; 454 Kg


Stability Chambers - Filiform Testing (33FT)



Chamber Volume33 cu ft 
934 Liters
Chamber Dimensions33”w x 27”d x 60”h 
84cm x 69cm x 152cm
External Dimensions41”w x 35”d x 90”h 
104cm x 89cm x 229cm
Temperature range35°C to 70°C
Control Resolution0.1°C
Humidity range20% - 96% RH
Control Resolution0.1°C
Uniformity at 37°C+ 2°C
Heat-up time: Amb-37°C7 minutes
Heat-up time: 10°C - 50°C22 minutes
Recovery time at 37°C**1.25 minutes
No. of shelves supplied4
Max no. of shelves19
Shelf area (each)6 sq ft (0.5 sq M)
Electrical Services220V, 1Ph, 50/60Hz 
2.0kW, 16A
Shipping Weight1,000 lbs; 454 Kg
 

 

Safety Stability Chambers (33SC)

 

SP Scientific Reach-in Chambers are constructed entirely from Stainless Steel, inside and out. The Safety models have a range of 35C to 70C + 2C uniformity throughout the chamber.

Model SEI 33SC is a high quality Temperature only Aerosol Stability Chamber, built for the testing of products containing or producing aerosols.

The SP Scientific Stability Chamber is constructed from 304 Stainless Steel, with the exterior surface painted as extra protection. The interior is unpainted allowing easy cleaning. Each Aerosol Chamber is supplied with 4 solid stainless steel shelves which locate into 4 pilasters, and these serve to hold the shelves rigid and bear the load of the samples being tested. There are 19 available shelf positions to allow high storage if required.

The rear wall of the Aerosol Chamber has a blow-out panel which is activated if the internal pressure reaches 4 p.s.i.

 

Large Capacity Glassware Dryer (33D)

Model SEI 33D is a high quality Glassware Dryer and sterilizer, built for large capacity laboratory and industrial applications where speed and volume are important.

The Stability Environments Chamber is constructed from 304 Stainless Steel, with the exterior surface painted as extra protection. The interior is unpainted allowing easy cleaning. Each Dryer is supplied with 4 rod type stainless steel shelves which locate into 4 pilasters. The pilasters hold the shelves rigid and bear the load. There are 19 available shelf positions to allow for varying glassware sizes if required.

The Large Capacity Dryer is capable of accommodating up to four standard large capacity laboratory washer baskets and achieves a temperature of 180°C


10 cu ft Models:



ICH Stability Chambers - Temperature & Humidity Controlled (10HR, 10TR, 10HA)

 SEI 10HRSEI 10TR  SEI 10HA
Chamber Volume 10 cu ft
283 Liters
10 cu ft
283 Liters
10 cu ft
283 Liters
Chamber Dimensions 30"w x 21.5"d x 27"h
76cm x 54.5cm x 68.5cm
30"w x 21.5"d x 27"h
76cm x 54.5cm x 68.5cm
30"w x 21.5"d x 27"h
76cm x 54.5cm x 68.5cm
External Dimensions 44"w x27.5"d x 45"h
112cm x 70cm x 114cm
44"w x27.5"d x 45"h
112cm x 70cm x 114cm
44”w x 27.5”d x 35”h
112cm x 70cm x 89cm
Temperature range* 25°C to 60°C / 25°C to 65°C 5°C
40°C to 75°C
Control Resolution 0.1°C 0.1°C 0.1°C
Humidity Range** 20% to 96% N/A 20% to 96%
Control Resolution 0.1% N/A 0.1%
No. of shelves supplied 4 4 4
Max no. of shelves
10
10 10
Shelf area (each) 4 sq ft (0.33 sq M) 4 sq ft (0.33 sq M) 4 sq ft (0.33 sq M)
Electrical Services 208/230V, 1Ph, 60Hz
3.0kW, 16A
208/230V, 1Ph, 60Hz
1.0kW, 8A
208/230V, 1Ph, 60Hz
2.0kW, 16A
Shipping Weight 750 lbs; 340 Kg 750 lbs; 340 Kg 550 lbs; 250 Kg

 

 

Typical Performance Envelope for a Temperature and Humidity Controlled reach-in Chamber:

 SEI 10HR     SEI 10HA

 

Chamber Construction

Stability Environments Reach in Chambers are constructed using Stainless Steel inside and outside. The exterior is painted to blend in with other Laboratory equipment, and to offer increased protection even in the harshest environments. The interior is 304 Stainless Steel incorporating Stainless Steel pylasters making 19 shelf positions available. 4 Stainless Steel shelves are supplied as standard. A rear wall Stainless Steel plenum is an essential component of our Stability PLUS™ airflow system which ensures optimum airflow to achieve the exacting parameter control required by users of these high quality enclosures.

 

Rear Wall Plenum Design

FEATURES

  • 2" thick glass fiber insulation
  • Painted Stainless Steel exterior
  • Stainless Steel interior with 4 shelves
  • Antimicrobial coatings available
  • Choice of door positioning and opening
  • Wide range of accessories available
  • Stability PLUS™ Airflow