Benefiting from a state-of-the-art
-75°C condenser - the Series 3 HT Evaporator from Genevac sets a new
benchmark for enhanced evaporation and lyophilisation results.
Drying HPLC purification fractions, such as water and acetonitrile, is a
routine yet essential task in many pharmaceutical laboratories. Typically
labs require HPLC fractions to be dried to a powder form, such that samples can
be accurately weighed, easily sub-sampled and re-dissolved. To provide a
rapid, high-throughput alternative to freeze drying of such samples - Genevac
developed its proprietary fast lyophilisation (LyoSpeed™) methodology for use
on their HT Series Evaporators. While the LyoSpeed™ has traditionally
worked well for hydrophilic samples - difficulties may arise where the sample
do not readily dissolve in only water.
The Series 3 HT Evaporator features an integral -75°C condenser as
standard. Operating at higher power than any other commercially available
condenser, users of LyoSpeed™ on Series 3 HT Evaporators have reported that a
greater percentage of samples yield dry powders than they have previously been
able to achieve.
To learn more about LyoSpeed™ and the Series 3 HT Evaporator please visit HT Series 3 or
contact Genevac on +44-1473-240000 / +1-845-255-5000 / firstname.lastname@example.org.
Genevac, part of SP Scientific and located in Ipswich, UK, offers a
comprehensive portfolio of evaporators to suit almost any solvent removal
application, purchasing budget or productivity requirement. SP Scientific is a
leading manufacturer of centrifugal evaporators and concentrators, freeze
drying / lyophilisation, temperature control/thermal management, glassware
washers, controlled environments, vial washing and tray loading machines. The
company sells its products under well-known brands including Genevac, VirTis,
Hull, FTS Systems, Hotpack and the recently acquired PennTech. SP Scientific
has ISO 9001:2008 registered production facilities in the Europe and USA.
Ipswich IP1 5AP