Freezemobile Freeze Dryers

The Freezemobile Large Capacity Freeze Dryer is available with condenser capacities of 25 or 35 Liters. Condenser refrigeration of -85C  available to allow configuration for a variety of solvents. A wide array of manifolds are available including stainless steel and acrylic, tree or drum manifolds, heated or unheated shelves with bulk or stoppering.

View F-Gas Range for this product.


 Click here to see how a shell bath can help you with freeze drying

Click the image to zoom in

  • FreezeMobile 25 EL- Tree Manifold

    FreezeMobile 25 EL- Tree Manifold

  • FreezeMobile 25 EL- Flask Attachment

    FreezeMobile 25 EL- Flask Attachment

  • FreezeMobile 35EL with Shell Bath

    FreezeMobile 35EL with Shell Bath

  • FreezeMobile - Tray Manifold

    FreezeMobile - Tray Manifold

  • Detachable Hose

    Detachable Hose

  • Adaptors

    Adaptors

  • Shellbath Flask

    Shellbath Flask

  • Double Flasks

    Double Flasks

Get More Information
KEY FEATURES
  • Mobile, free standing design
  • Refrigeration systems with temperatures of -85C
  • Smooth wall condenser for quick defrost turnaround time
  • Convenient front facing vacuum pump oil quick-change module
  • Pressure control to provide heat transfer for sublimation as required
  • Wide variety of manifolds and accessories available
  • Optional filter traps to protect the vacuum pump
KEY BENEFITS
  • Configure a system to meet your application/solvent needs
  • Stainless steel manifold and adaptor plate for aqueous and organic solvent applications
  • Large batch processing in a single run with 25 or 35 liter condenser capacity
  • Accommodate a wide variety of product solvents with temperatures to -85C
  • Minimize downtime with quick-defrost turnaround time
  • Shorten cycles with pressure control for enhanced heat transfer
  • Easy install, requires standard laboratory utilities

Specification
EL
Maximum Low Condenser Temperature (°C)   60Hz or 50Hz
-85C / -82C
Maximum Low Temperature for Optional Shell Bath (°C) 60Hz / 50Hz
-70C / -67C
Condenser Capacity in 24 hours*   FM25 /  FM35
This specification is based on freeze drying water as aggessively as possible.  
The ability to collect ice is application dependent and your actual rate will most likely be lower
14 L / 20L
Condenser Capacity Total   FM25  / FM35
25 L / 35L
Condenser Surface Area   FM25 / FM35
506 in2 /3264 cm2  /  750 in2 / 4838 cm2
Vacuum Pull Down Time to 100 mT  (0.133 mB)  (minutes)
≤20 minutes
Lowest Vacuum  mT / mB (Refrigerated, Dry and Empty)
15 mT / .0198 mB
Note: Performance specifications are based on SP Industries test data from units operating at an ambient room temperature of approximately 20 °C. 
SP Industries recommends an operating range of 15-25 °C (59-77 °F).


FM25 

Dimensional Data
Width (in. / cm)
35 / 89
Depth (in. / cm)
29 / 74
Height (in. / cm)
37 / 94
Approximate 
Weight (lb / kg)
280-495 / 127-225
FM35 

Dimensional Data
Width (in. / cm)
35 / 89
Depth (in. / cm)
36 / 91
Height (in. / cm)
37 / 94
Approximate 
Weight (lb / kg)
450-500 / 205-225

 

  • Laboratory research
  • Peptide production
  • Protein purification
  • Products for analysis – plant material, organic tissue, waste products

View Available Wide Mouth Filter Seal Flasks (PDF)
Note: Additional standard and custom accessories are available, along with flask adapters, glassware and other components. Contact SP Scientific for more information.