SP FTS ThermoJet ES Precision Temperature Cycling System

ThermoJet Environment Simulator is a precision-controlled temperature forcing system that delivers an airstream of up to 20 SCFM to rapidly change the temperature of a product or Device Under Test (DUT).

ThermoJet provides temperature transition speeds unmatched in the industry, and can sustain air cooling temperatures of –80°C at 20 SCFM. It is made with the proven and reliable Dual Cool cascade refrigeration system and does not require complex and difficult blended gases.

The ThermoJet provides the smallest footprint for a floor model air stream temperature cycling system.

View F-Gas Range for this product.

For more information on how to integrate an SP FTS Thermojet into your injection molding or manufacturing application, contact our team of product specialists at thermal@spscientific.com

Click the image to zoom in

  • ThermoJet Environment Simulator

    ThermoJet Environment Simulator

  • ThermoJet Environment Simulator Enclosure

    ThermoJet Environment Simulator Enclosure

  • ThermoJet Environment Simulator - Top

    ThermoJet Environment Simulator - Top

Get More Information
  • Temperature range of +225°C to -80°C
  • High Temperature option of +350°C
  • Delivers 5 to 20 standard cubic feet of air/minute
  • Temperature transition from +200°C to -65°C in less than 15 seconds -80°C to +200°C in less than 15 seconds
  • Reliable and robust Dual Cool cascade refrigeration system does not require difficult blended gases
  • Small footprint allows maximization of space usage
  • External Device Under Test thermocouple for controlling temperature accuracy at the device
  • Configured with no holding arm or mechanical arm for easy air stream placement
  • Dry air purge to help protect test site
  • Selection of shrouds and boxes to meet your application
  • Built in air dryer with oil, water and particulate filters
  • Enhanced BTU/watt removal capabilities provided by higher air flow rate
  • Effortless change temperature and air flow set points
SPECIFICATIONS1,2
Temperature
     Maximum Low
-80°C  
     Maximum HighStandard +225°C / High Temp +350°C
     Accuracy
1°C - Factory calibrated with NIST traceable device
     Setability0.1°C
     Indication/Resolution0.1°C
     Stability±0.5°C at discharge nozzle
     SensorsSpecial limits of error type-T thermocouples
     CalibrationSoftware controlled
     Max. Transition Rates
+125°C to -55°C in <10s / -55°C to +125°C in <10s
+200°C to -65°C in <15s / -80°C to +200°C in <15s
     Stabilization Rate3
+125°C to -55°C in <12s
-55°C to +125°C in <4s
Air Filtering/Drying
     Coalescent
Water, Oil, and Particle Filtering
     Heatless Regenerative
-85°C dew point
Air Flow Specifications
     Input
25 SCFM @ 80-125 psig, dew point 10°C
(11.8 l/s @ 5.5 - 8.6 bar)
     Output
5-20 SCFM (2.3 - 9.4 l/s)
Factory calibrated with NIST traceable device
     Setability1 SCFM (0.4 l/s)
Physical Characteristics
     Footprint21" wide x 27" deep (54 cm x 69 cm)
     Arm Reach56" radius (140 cm) max.
     Rotation350°
     Work Surface Height38" (100 cm)
     Weight425 lbs (193 kg)
     Mobility4 full swivel, lockable casters
     DB Rating4@ 65 dB(A)
System Controller Features
     Type
Microprocessor PLC-based PID
     Program
Save and load 48 programs of 8 segments each
     SafetiesLow flow, over temp, EMo interlock
     Status Indication
Air input, air temp, air/DUT control,
OK, run/idle, purge, defrost
     Available LimitsMax. ramp rate, min./max. air temperatures
     Ramp Rates1°C/min. incremental up to 999°C
     Remote InformationIEEE, RS232 Communication
System Requirements
     Temperature+12°C to +25°C
     Humidity0% to 65% RH
     Electrical
208V-230V/60Hz, 200V/50Hz @ 1Ph 30A
220V-230V/50Hz @ 1Ph 30A



NOTES:
1. Specifications based on 230V, 60 Hz at 15 SCFM, ambient 23°C, 50% humidity.
2. System may be used with lower pressure at reduced specifications.
3. Clock started when temperature reached setpoint.
4. Operating at low air flow.
  • Device cycling and testing
    • Chips
    • Solenoids
  • Plastics molding applications

To configure a THJ to fit your requirements, select options from each of the groups below.  For assistance in determining which option is right for you or to receive a quote, please contact a product specialist.  We will be glad to discuss the options and their importance and use with you.

 

ThermoJet ES EnviroSim


Standard features include 5-20 SCFM adjustable air flow rate, caster mounted, dual air filters, built-in air dryer, touch screen microprocessor control, 0.1°C temp indication, external thermocouple for DUT control with autotuning, RS-232 and GPIB remote interface, and a 3 year warranty on the refrigeration system.

 

Model Number

Description

THJ80ES

 

 

0

0

-80°C to +225°C, RS232/GIPB

 

   

 

Options

l

l

 

Voltage

 1  

     

208V-230V/60Hz, 200V/50Hz

 

 

2 

 

     

220V-230V/50Hz

 

 

  3  

 

     

208V-240V/ 50/60 Hz VAC & Hz Adjustable

 

Holding Arm

 

0

     

No holding arm Chamber Ready Unit

 

   

1

     

No holding arm, 8 foot air delivery line

 

     

3

     

Motorized Cylinder with Pneumatic Head lift

 

Temp Range

   

0

     

Standard Temperature (225ºC)

 

       

1

     

High Temperature (350ºC)

 

ThermoJet Accessories

Part Number

 

SH25T1

Thermal cap, transparent, 2.5" ID x 2" deep

 

SH35T1

Thermal cap, transparent, 3.5" ID x 2" deep

 

SH45T1

Thermal cap, transparent, 4.5" ID x 2" deep

 

SH55T1

Thermal cap, transparent, 5.5" ID x 2" deep

 

SH65T1

Thermal cap, transparent, 6.5" ID x 2" deep

 

SET1

Static Eliminator, for transparent

 

THJ-TC1

"K" type thermocouple kit

 

TJ-TC1

"T" type thermocouple kit

 

100006817

2IN (50MM) Tip Length, Docking collar

 

CH4

Flexible Hose, 4 Ft,

 

SSK245

Silicone rubber shroud kit, non-conductive, 2 pc, used with 4.5" and 5.5" thermal cap

 

CSSK235

Silicone rubber shroud kit, conductive, 2 pc, used with 3.5" thermal cap

 

CSSK245

Silicone rubber shroud kit, conductive, 2 pc, used with 4.5" thermal cap

 

PAC-SS1

Silicone sponge, 1' x 1' x 1/4"

 

PAC-SS3

Silicone sponge, 1' x 1' x 1/2"

 

PAC-SS4

Conductive silicone sponge, 1' x 1' x 1/16

 

PAC-SS5

Silicone sponge 3’ x 3’ x 1/4"

 

PAC-SS6

Silicone sponge 3’ x 3’ x 1/2"

 

CS101204

Enclosure, Chamber, 10"x12"x4"ID w/DB25

 

CS141604

Enclosure, Chamber, 14"x16"x4"ID w/DB25

 

HD101204

Enclosure, Hood, 10"x12"x4"ID

 

HD141604

Enclosure, Hood, 14"x16"x4"ID

 

PE-2253

Display cable, 10 ft

 

NHA101

Handler mating hose

 

THJ-AP

Auxiliary Purge with Adjustable Flow

 

THJ-NAA

Nozzle Adaptor Accessory